Auto Cleaning UV Sterilizer

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Shanghai
Validity to: Long-term effective
Last update: 2019-09-23 14:57
Browse the number: 321
inquiry
Company Profile
 
 
Product details

Working Principle


UV disinfection is the international industrialized latest water disinfection technology,which is with thirty years of research and development in the late nineties.

Application of UV disinfection is among 225 ~ 275nm, peak wavelength of 254nm ultraviolet spectrum of microbial nucleic acid to destroy the original body (DNA and RNA), thereby preventing protein synthesis and cell division, they ultimately can not replicate the original body of microorganisms, not genetic and eventually death. Ultraviolet disinfection disinfect fresh water, sea water, all kinds of sewage, as well as a variety of high-risk pathogenic body of water. Ultraviolet disinfection sterilization is the world's most efficient, the most widely used technology, the lowest operating costs of high-tech water disinfection products.

Water Quality Requirements

Water quality plays a major role in the transmission of germicidal UV rays. It is recommended that the water does not exceed following maximum concentration levels.

Iron

≤0.3ppm(0.3mg/L)

Hardness

≤7gpg(120mg/L)

Turbidity

<5NTU

Manganese

≤0.05ppm(0.05mg/L)

Suspended solids

≤10ppm(10mg/l)

UV Transmittance

≥75%


General structure


Specifications

inlet/outlet

1"~12"

water treatment quantity

1~290T/h

power supply

AC220V±10V,50Hz

reactor material

304/316L stainless steel

maximum working pressure of system

0.8Mpa

casing cleaning device

manual cleaning type


Use conditions

Water temperature: 0 ° C ~ 50 ° C;

Ambient temperature: -5 ° C ~ 50 ° C;

Relative humidity: less than 93% (at 25 °C)

Voltage: AC220V±10V,50Hz

Working pressure: 0.8Mpa, it is forbidden over loading working pressure

Sterilization of drinking water: 1cm UV transmittance (T254): 95%~100%; when the original water quality is lower than the national drinking water standard (chromaticity higher than 15 degrees, turbidity higher than 5 degrees, iron content is higher than 0.3 mg / liter), it should be used pre-treatment method to meet the conditions of use of the equipment.

Aquaculture water sterilization: fresh water and seawater filtered by sand filtration or other treatment.

Sewage: According to the sterilization requirements, the water quality of the disinfection equipment is 1cm (T254): ≥40%; the other requirements is meeting the secondary standard of the National Integrated Wastewater Discharge Standard GB8978-1996.

If the water quality, needs to be disinfected, cannot meet the above requirements. It should be properly pretreated, such as flocculation, sedimentation, filtration, etc.Methods to remove various impurities in the water.

http://www.uv-towin.com/

Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]